Even when starter battery is dead, unit will still operate on pull start. Gas conversion will start easily from cold and it requires no choke. Quick press of the primer introduces a shot of gas to the carburetor and the machine will start easily.
This is how you will have this conversion:
1=> Replace Carburetor (Kafuretor) engine to Hybrid Carburetors LPG/Gas.
2=> Find LPG/Gas cylinder original.
3=> Then find Gas/LPG Regulator.
INSTALLATIONS:
Installation is very simple and must be done step by step:
* Check the oil level and run the generator to ensure that it is in perfect working condition.
* Open the air filter compartment and remove the filter.
* Unscrew the air filter housing to expose the two nuts attaching the carburetor to the combustion chamber.
* Unscrew the nuts carefully from the studs.
* Partially shift the carburetor forward a bit to expose the gasket.
Please take note of the gasket between the combustion chamber and the carburetor and ensure that it is not damaged. Because of damaged, it would lead to pressure loss and make the generator unstable.
If gasket is cracked or damaged, you can replace it with a new one. It is quite cheap.
* Carefully remove the connecting rod and the spring on the carburetor.
Thereafter, the carburetor can be brought out completely and replaced with the dual fuel carburetor.
