When the gas regulator knob is turned on, the pin inside goes down and releases the gas. The gas regulator works as a chamber room where it gets released. Now, there is only one way for the gas to flow, and it is through the hose pipe and it reaches the stove.
Make sure you purchase only compatible gas regulators for your domestic/camping gas cylinder bottles. Domestic LPG gas regulators comes in two types:
1. Fixed Low Pressure
2. Adjustable High Pressure
Low pressure regulators are mainly used for domestic use, while the high pressure regulators are designed for gas supply for medium pressure (2 bar) appliance. They are mainly use for industrial purposes. The Quick-On+ regulators are the commonly used for domestic home-use and camping. However, do contact your supplier or distributor for usage and other technical info.
Fitting The Gas Regulator On The Cylinder Bottle Valve
1. Make sure the gas regulator inlet and outlet are compatible with the gas cylinder valve and the appliance being fuelled. It must be fitted directly to a gas cylinder featuring the same connection valve as the gas regulator. If you are not sure about the usage, please ask the delivery person for a demonstration.
2. Before installation, inspect the product for damage and dirt. Make sure gas cylinder valve is in a clean condition. Avoid that the hope of the gas cylinder valve is not obstructed or blocked by dirt or debris.
3. Check whether sealing rubber (O-ring) is in place inside the gas cylinder valve by feeling the same with the help of your little tip finger. Do not attempt to use gas cylinder if the O-ring rubber is missing. Contact your distributor for replacement of the gas cylinder bottle, as this can be very dangerous. LPG gas could escape. The sealing O-ring rubber helps reduce iron to iron friction of the valve and gas regulator. It also helps tighten gas regulator on the valve.
4. Make sure that all the taps of the appliance being fuelled are firmly closed before the installation. The gas consuming appliance should be in off position before fitting in the gas regulator.
5. By now, your hose pipe is correctly fastened to the gas regulator and appliance.
6. Make sure the handle, the control knob of the gas regulator is in the "closed" position. Turn the handwheel clockwise until it can not move
7. Remove the plastic protective plug from the automatic valve. Then fit in the gas regulator onto the angle valve. Afterwards, give a strong push downwards. A "click" sound should be heard, meaning the gas regulator had been correctly fitted.
Always remember to perform a leak test after attaching a new gas regulator, everytime you reconnect your gas regulator with soapy water detergent. Spray the entire valve, gas regulator and hose assembly with the soapy water solution. Bubbles will form if there is a gas leak. You may also smell the gas if a leakage occurs.
FAQs
Q: How do I connect a gas regulator to a gas bottle?
A: To connect a gas regulator to a gas bottle, first, make sure the valve on the gas bottle is closed. Then, attach the regulator to the valve by screwing it on tightly. Once connected, open the valve slowly to allow gas to flow into the regulator. Finally, check for any leaks using soapy water and tighten connections if necessary.
Q: What tools do I need to connect a gas regulator to a gas bottle?
A: You will need an adjustable wrench or spanner to tighten the connections securely.
Q: How do I know if there's a leak after connecting the gas regulator?
A: You can check for leaks by applying a soapy water solution to the connections. If bubbles form, it indicates a leak, and you should tighten the connections further.
Q: Can I use any gas regulator with any type of gas bottle?
A: No, it's important to match the regulator with the type of gas and the pressure required for your appliance. Using the wrong regulator can be dangerous.
Q: Is it safe to connect a gas regulator myself?
A: If you follow the proper steps and take precautions, it can be safe. However, if you're unsure or uncomfortable, it's best to seek professional help to avoid accidents.