Yeah, using a double burner gas stove might seem like a leap into the unknown, as it is quite much different from the normal traditional single burner gas stoves. So, in this guide, I'll share you the process and have you cooking confidently in no time.
One thing about double burner gas stoves is the setup. It is very different from the single burner, but still maintaining the same function. The shiny surfaces of the two burners is what makes it a very go-to choice for multiple cooking.
In setting up the double burner gas stove for usage, location matters. Choosing the right spot for your double burner stove is very recommended. Make sure you opt for a well-ventilated area with easy access to a gas source. Remember, there should be sufficient space around the stove for safety.
Next is connecting the gas hose to a double burner stove. You can follow a similar principle to a single burner, but this time, you have two burners to consider. Align the threads of the hose with the stove's inlets, tightening them securely. A double-check for tight connections is a must to prevent gas leaks.
Yeah, you should know that gas cylinder needs a regulator to function. The regulator, responsible for controlling gas flow, plays a very important role. Connect it to the other end of the hose, following any clear markings for correct installation. Take a moment and confirm if it is properly fitted.
Before igniting the burners, it's also very important to conduct a safety check for potential gas leaks. Apply a soapy solution to the hose and regulator connections. If bubbles form, address any loose connections immediately. With the safety check completed, it was time to turn on the gas. Slowly open the gas valve on the regulator. Listen for the gentle flow of gas. If all is well, close the valve, and you're ready to ignite.
Most double burner stoves come equipped with either an ignition button or a manual igniter for each burner. Follow the stove's instructions to light the flames. If using a manual lighter, place it near the burners and turn the gas valves on.
One good thing about the double burner gas stove is that, you can adjust the flame intensity on each burner. The control knobs are attached to both/each sides – low for simmering and high for boiling. You can use both double burner for multiple cooking in the kitchen.