.png)
If you have a patio heater that requires a gas supply, then you'll need to connect a gas bottle to it in order to keep it running. One common type of gas bottle used for this purpose is a Calor gas bottle. In this article, we'll guide you through the steps on how to safely and properly connect a Calor gas bottle to your patio heater.
Step 1: Check the User Manual
Before connecting the Calor gas bottle to your patio heater, make sure to read the user manual and follow the instructions carefully. This will help you understand the specific features and safety guidelines of your patio heater.
Step 2: Choose a Well-Ventilated Area
When connecting the Calor gas bottle, choose a well-ventilated outdoor area, on a solid floor to avoid the risk of carbon monoxide poisoning. Make sure there is enough space around the heater and gas bottle for proper airflow.
Step 3: Turn Off the Gas Supply
Before connecting the gas bottle, make sure the gas supply valve is in the "off" position. Do not attempt this if the gas cylinder is in an "on" position.
Step 4: Remove the Old Gas Bottle
If there is an old gas bottle attached to the patio heater, carefully remove it and set it aside.
Step 5: Attach the New Gas Bottle
To attach the new Calor gas bottle, remove the plastic cap from the top of the bottle and place it in an upright position. Make sure the bottle is securely fastened to the base of the patio heater according to the manufacturer's instructions.
Step 6: Connect the Gas Regulator
Attach the gad regulator to the valve on top of the gas bottle, making sure it is securely fastened.
Step 7: Connect the Gas Hose
Connect the other end of the regulator to the gas inlet on the patio heater using the gas hose provided. Make sure it is securely fastened.
Step 8: Turn On the Gas Supply
Once everything is securely connected, slowly turn on the gas supply valve and check for any gas leaks by applying a solution of soapy water to the gas connections. If you see any bubbles, there may be a gas leak. Turn off the gas supply immediately and tighten the connections.
Step 9: Test the Patio Heater
Once you've checked for leaks, turn on the patio heater and test it to make sure it's working properly.
So as you see, connecting a Calor gas bottle to a patio heater is a relatively simple process if you follow these steps. However, it's important to remember that working with gas can be dangerous if not done correctly, so it's essential to take all necessary precautions and follow the manufacturer's instructions carefully. If you're not comfortable doing it yourself, it's best to hire a professional to ensure that it's installed correctly and safely.