Note, gas leaks may cause fatal fires or explosions. Valve on the gas cylinder bottle allows the gas to pass through the regulator to the stove. When the regulator knob is turned on, the mechanism activates the release of gas. The gas cylinder bottle valve is the only way for the gas to flow through the regulator and it reaches the stove.
Overfilling a gas cylinder bottle is the only reason overflowing could occur. Excess flow begins as LPG is refilled into gas cylinder bottle or tank under pressure. Gas escape even through a small exposed area or space.
All gas leaks, however small, are dangerous and must be eliminated. Escaping gas can normally be traced by smell or sound but liquid detergent should be brushed over the area to confirm the location of the leak. NEVER look for a leak with a naked flame.
If you noticed overflowing, followed by hissing sound, quickly detect the gas regulator from the gas cylinder valve. Do not store the cylinder bottle indoors, rather, move it outdoor to a well ventilated area. Just disconnect the permanent piping of the appliance. If cylinder bottle is outdoor, this would greatly reduce the cost of fires and explosions. For example, if outdoor, gas leaks usually just dissipates.
Another possibility of hissing sound from regulator valve, is if the sealing rubber (O-ring) is damaged, widened or has expanded. The O-ring rubber allows gas regulator to perfectly fit onto the gas cylinder bottle valve. Do not attempt to use gas cylinder bottles without the O-ring rubber. You can check if the sealing rubber is presence by using your finger tip into gas cylinder valve. It is always recommended as safety precautions that the O-ring rubber should be changed each time you go for a refill. Ask your distributor or gasman for demonstration and replacement.
FAQs
Q: What causes gas cylinder overfilling?
A: Gas cylinder overfilling can occur due to improper filling procedures.
Q: What are the risks of gas cylinder overfilling?
A: Overfilling a gas cylinder can lead to increased pressure inside the cylinder, which may cause it to leak or explode. This can result in serious injuries or property damage.
Q: How can I prevent gas cylinder overfilling?
A: To prevent overfilling, ask your gas supplier/gasman to follow proper filling procedures provided by the manufacturer. Make sure it is approved filling equipment and never tamper with safety devices on the cylinder. Additionally, make sure that the cylinder is stored and handled in a safe manner.
Q: What should I do if I suspect a gas cylinder is overfilled?
A: If you suspect a gas cylinder is overfilled, do not attempt to use it. Instead, immediately move it to a well-ventilated outdoor area away from ignition sources and contact your gas supplier for assistance.
Q: Can overfilled gas cylinders be safely used?
A: No, it's not safe to use an overfilled gas cylinder. Using an overfilled cylinder increases the risk of accidents and should be avoided at all costs.
Tags
LPG gas Overfilling